Balcony window

Innovative, large roof window in which the open sashes create a balcony. The upper sash is opened upwards, the lower forward allowing easy access to the balcony bay. The sash when opened in position form 0 °to 45 ° is supported by innovative supporting mechanism enabling to leave the sash open in any position within this range.
Side safety barriers are integrated into the bottom sash and slide out during opening. When closing the lower sash, balcony rails are hidden inside the window and are not visible above the roof surface. Concealed under the window flashing elements they do not collect dirt or spoil aesthetics of the roof. Once the balcony window is open, barriers are always dry and clean to secure trouble-free operation.
The window is operated by the handle located at the bottom of the upper sash. Handle has a two-point locking mechanism.
The sash when rotated through 180 degrees is locked by the bolt for cleaning.
Automatic air inlet V40P.
Both the upper and lower sashes are equipped with safety glazing unit P2.
The highest quality pine wood, glued in layers, vacuum impregnated.
Double coated wood with ecological acrylic lacquer in natural colour.
Increased resistance to burglary - TopSafe system.
A wide range of accessories.
Installation range from 35 to 55 degrees

Manufactured in pine, vacuum impregnated and double coated with acrylic lacquer.
TopSafe - increased anti-burglary resistance system.
Under-pane seal provides extra tightness in extreme weather conditions and reduces the micro-vibrations of the claddings.
Elegant window handle positioned at the lower part of the sash for easy operation with two opening points for ventilation.
Suitable for roof pitches between 15-90°.
Flashing supplied with the window.

The centre pivot window, but its axis of rotation is situated above the centre of the window so even a tall person can easily walk up to the window edge. The lower part of the sash fulfils a top hung window function and the upper part of the sash is an additional source of daylight. The sash when opened in position from 0 to 45 degrees is supported by innovative supporting mechanism enabling the sash to be open in any position within this range.
The window when installed in roofs with pitches 39-43 degrees will satisfy the requirements of DIN 5034-1 standard*, according to which the bottom window edge has to be situated 95cm above the floor level and the top minimum 220cm.
The window is operated by the use of handle located at the bottom of the sash. The handle is equipped with a two-step micro opening mechanism. Automatic air inlet V40P.

Standard equipped with energy efficient glazing unit U3. The highest quality pine wood, glued in layers, vacuum impregnated. Double coated wood with ecological acrylic lacquer in natural colour. Sash rotated through 160 degrees is locked by the bolt for cleaning. Increased resistance to burglary - TopSafe system. A wide range of accessories. Installation range 20-65 degrees.

he FEP P2 panoramic window is of top hung and pivot design.
There are two opening systems: outward with 40° opening angle, when blockade released changes to 68°; pivot, enables the sash to be rotated through 180°, used e.g. for cleaning the outer pane.
The large sash opening angle allows for an easy approach to the opened window and provides for a wide view to the outside.
The large window dimensions and ability to lift the sash to an angle of 68° provide an access to the roof for maintenance, repair or escape in case of emergency.
Manufactured in pine, vacuum impregnated, coated with two coats of acrylic lacquer.
System of reinforced window structure topSafe.
Handles positioned on the lower part of the sash enable the window to be opened slightly, whilst a top catches serve to rotate the sash and to change the method of opening.
Suitable for roofs with pitches between 15-55°.

The L-shaped windows are designed to be installed where the roof meets a vertical wall.
These windows serve to extend the roof window into the wall. This results in the amount of light entering the room and the field of view being greatly increased.
The L-shaped combination windows can be combined with roof windows of any design.
Standard equipped with safety glazing unit L3 or P5.
Windows equipped with multi-point locking fittings.
The highest quality pine wood, glued in layers, vacuum impregnated.
Double coated wood with ecological acrylic lacquer.
A wide range of accessories.
The roof window installation range joined with L-shaped combination window is 15 to 55 degrees.

Top windows are windows which are triangular FAP Z6, or arched FBP Z6.
They can be installed on the join above any roof window. Top windows are non opening because they are made of special single wooden profiles.
The windows are made together with flashings to suit flat roofing material (type S) and for profiled (type Z). The glazing unit consists of toughened external and internal glass. The internal glass has a low emission coating.
Original shapes, additional lighting and an interesting interior design are without doubt the advantages of these windows.
Use of top windows gives buildings a strikingly distinctive character.
Manufactured with pinewood, vacuum impregnated and double coated with acrylic varnish.
Suitable for roofs with pitches between 20-90° (when fitted with correct flashing).